Sand Dollar Fountain Specifications:
- Dimensions: 14.5″W x 6″H
- Base: 6.5″W
- Weight: 20 lbs.
- Holds approximately 3/4 gallons of water
- Available in Cream and Riviera Blue finishes
Due to the nature of concrete there is very little that can go wrong with it as long as it’s properly cared for. For this reason Campania does not offer a warranty for their products. Our 15+ years of experience has shown that Campania’s products are more than capable of withstanding the test of time. These products are designed to last well over 40 years, and will as long as proper care is provided for them.
Sand Dollar Fountain Features:
- Hand-made of Glazed Pottery
- Glazes on our containers consist of natural, not chemical, components and therefore the final color of the product will vary creating the unique beauty of each piece.
- No plumbing necessary.
- Fountain is self circulating.
- High-fired for durability.
- Lightweight
- Frost resistant
***While they are considered frost-resistant, these lightweight containers should be brought in during the winter and stored in a covered, frost-free location away from the elements.
Sand Dollar Fountain Includes:
- 120 GPH electric pump
- All hardware and tubing required to properly assemble the fountain
- Full step by step directions
Campania International’s new line of glazed and terra cotta pottery is high fired between 990 (terra cotta) and 1000 (glazed) degrees centigrade to ensure frost resistance and durability. Due to the processes used in the manufacturing of our hand-made and hand-glazed containers, all variations with respect to firing, color, size and crackling are natural occurrences in the manufacturing process.
We suggest that birdbath/fountain tops not be left outside in the winter. Once the top fills with water/snow and freezes, the top may crack. All birdbath/fountain bases, bench legs and statuary should be raised up off the ground in winter so they will not freeze to the ground surface. Ideally, a fountain should be stored indoors in the winter away from the elements. However, if a fountain bowl must be left outside, remove all pumps, rubber stoppers, drain pipes, finials and small components, and cover the top with burlap or any absorbent material (old blanket/towel) and then wrapped with dark plastic, making sure that water does not accumulate in the basin and freeze. Fountain pumps, finials, and other small components should be stored indoors. Check the fountain periodically to insure that the cover is secure and water is not accumulating in any fountain component.